PÜRKAY WB Epoxy Conductive Primer
Water-based, electrically conductive, two-component epoxy primer
Characteristics
PÜRKAY WB Epoxy Conductive Primer, two-component, It is an epoxy-based, solvent-free conductive primer . It ensures that the static electricity collected by the conductive floor covering material reaches the conductive copper matrix in the lower layer optimally. By providing maximum conductivity on the entire applied surface, it transfers even the static electricity at the lowest resistance to the grounding system.
Specifications
| Number of Components: | 2 |
| Density Mix : | 1.30 – 1.40 gr/cm³ 20ºC TS EN ISO 2811-1 |
| Solids Mixture (%): | Weight 62 – 64 |
| VOC: | Does not contain volatile organic compounds |
| TOC: | %52-57 |
| Shore D : | 55 – 65 ASTM D 2240, DIN 53505 |
| Application Thinner: | It thins with water. 10% max. |
| Mixing ratio : | By weight : A/B :85/15 |
| Mixture Life : | 30 – 40 min. /23ºC, 200 g. DIN 16945 |
| Electrical Conductivity Coefficient: | 2 – 20 kΩ (DIN 51953) |
| Method of Application : | Trowel, roller |
| Consumption: | 0.3 kg/m² |
| Storage : | 12 months in original packaging, below 12-25ºC, protected from frost. |
| Packaging : | A/B: 17/3 = 20 kg suit |
| Drying Time: | Powder Drying: 30 – 60 min. 23 ºC TS 4317 Touch Dry :4 – 5 hours at 23ºC TS 4317 Waiting Time Between Coats: 1 day at 23ºC TS 4317 |